CABINDA PROVINCE
In Cabinda province, Tecnovia Angola produces and supplies aggregates and bituminous mixtures at the Cochiluando industrial plant, and ready-mix and pre-fabricated concrete at the Caio industrial plant.
Both plants have good road access. Cochiluando is located 50 km north of the city of Cabinda, and Caio 12 km north.
The Tecnovia Angola laboratory located at the Caio plant performs quality control, and tests the bituminous mixtures and ready-mix concrete, in compliance with the applicable standards.
INFRASTRUCTURES
Quarry
Laboratory
Workshop
Crushing Plant
Central Construction Yard
Bituminous Plant
Living Quarters
Office
Concrete Plant
PRODUCTS AND SERVICES
The Cochiluango industrial plant produces aggregates with various grain sizes, from rubble to gravel, pit-run gravel and rock dust, for use in construction and civil engineering.
The range of available aggregates is presented in the table below.
|
CABINDA INDUSTRIAL PLANT – COCHILOANGO- |
|
Aggregates (d/D) |
|
Gravel 6/13 |
|
Gravel 13/19 |
|
Gravel 13/25 |
|
Fine gravel 4/6 |
|
Washed Sand 0/4 |
|
Coarse rubble |
|
Rock Dust 0/6 |
|
Dirty rubble |
The Cochiluango bituminous mixtures plant produces various types of hot bituminous mixtures for paving and surfacing.
The different types of bituminous mixtures produced at the plant are presented in the table below, and other mixtures can be manufactured upon consultation.
|
CABINDA INDUSTRIAL PLANT – COCHILOANGO- |
|
BITUMINOUS MIXTURES |
|
Bituminous Macadam 0/25 |
|
Macadam 0/25 with cement |
|
Binder 0/19 |
|
Hard-wearing 0/14 |
|
Hard-wearing 0/14 with cement |
The Caio concrete plant produces concrete of all strength classes, as shown in the table below.
The fleet of concrete mixers and concrete pumps at this plant is scaled according to production and market needs.
|
CABINDA INDUSTRIAL PLANT – CAIO- |
|
HYDRAULIC CONCRETE |
|
Concrete C12/15 |
|
Concrete C16/20 |
|
Concrete C20/25 |
|
Concrete C25/30 |
|
Concrete C30/37 |
|
Concrete C35/45 |
The Caio industrial plant has the necessary means and technical skills to produce various shapes of precast concrete for use in construction and civil engineering.
Tecnovia Angola also has the means and technical skills to manufacture reinforced and prestressed concrete for contract work.
|
CABINDA INDUSTRIAL PLANT – CAIO- |
|
PRECAST CONCRETE SHAPES |
|
Kerbstone 25x15x12 (800) |
|
Kerbstone 20x15x12 (800) |
|
Edging Stone 20×8/10 (800) |
|
Blocks 40x20x20 |
|
Blocks 40x20x15 |
|
Blocks 40x20x10 |
|
Pipes 600×1000 |
|
Pipes 800×1500 |
|
Pipes 1000×1000 |
|
Pipes 1200×1000 |
|
Conc. Cone 1000 |
|
Conc. Cone 1200 |
|
Exc. Cone 1200 |
|
Paver/ Paving Stones 200x100x60 |
|
Paver/ Paving Stones 200x100x80 |
|
Slabs 1000 |
|
Covers C1000 |
Technical-commercial information should be requested by contacting:
COCHILUANGO
CAIO
